Archiving Data with Snapshots in LVM2
In some cases, it is advised to ensure that enough storage space is allocated for the snapshot or (as discussed below) a backup directory that will contain all of the archived snapshot data for restoring purposes. To extend an existing volume group, a new PV needs to be labeled. To do so, identify the physical storage device, and using fdisk, sfdisk or parted, create the desired partition size. Verify the partition by reading back the partition table. Then, continue to create the PV:
$ sudo sfdisk -l /dev/sde Disk /dev/sde: 261 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sde1 0+ 260 261- 2096451 83 Linux /dev/sde2 0 - 0 0 0 Empty /dev/sde3 0 - 0 0 0 Empty /dev/sde4 0 - 0 0 0 Empty $ sudo pvcreate /dev/sde1 Physical volume "/dev/sde1" successfully created
Append a newly labeled PV to an existing VG with the vgextend command:
$ sudo vgextend VolGroup /dev/sde1 Volume group "VolGroup" successfully extended
If at some point the PV needs to be removed from a VG, use the vgreduce command followed by the names of the VG and the PV:
$ sudo vgreduce VolGroup /dev/sde1
If the VG is being extended for the purpose of creating a backups directory to archive routine snapshots, following the normal lvcreate procedure, define the name, size and VG for the desired LV. Then, format the LV with a filesystem, and for file I/O accessibility, mount it to a directory path:
$ sudo lvcreate --name backups --size 1G VolGroup Logical volume "backups" created $ sudo mke2fs -j /dev/VolGroup/backups $ sudo mkdir -p /mnt/VolGroup/backups $ sudo mount /dev/VolGroup/backups /mnt/VolGroup/backups
When the snapshot has been created, an archive can be made with the tar command, located in the newly created backups directory:
$ sudo tar -pczf /mnt/VolGroup/backups/rootsnapshot.tar.gz ↪/mnt/VolGroup/rootsnapshot
In an event of failure or if older revisions of files need to be retrieved, the archived snapshot can be used to restore the original data contents. This is an extremely ideal backup strategy when running a high-availability production environment. No downtime is required. Although this backup does not necessarily need to be written to a file, using the tar or dd commands, the snapshot can be written directly to another physical storage device, including a tape drive:
$ sudo tar -cf /dev/st0 /mnt/VolGroup/rootsnapshot
LVM2 comes prepackaged with some of the more common Linux-based distributions. In some cases, it even is used as part of the default filesystem layout. Its snapshot feature is one of those lesser-known treasures that really can be used to one's advantage, ranging from personal to larger-scale environments. All it takes is a little time, a little knowledge and a plan on design, deployment and configuration.
dmsetup(8) is a low-level tool used to manage logical devices that use the device-mapper driver. The LVM2 user-space toolset relies heavily on the device-mapper kernel module and support library.
LVM HOWTO: tldp.org/HOWTO/LVM-HOWTO/snapshotintro.html
Logical Volume Manager (Wikipedia): en.wikipedia.org/wiki/Logical_Volume_Manager_(Linux)
Snapshot (Wikipedia): en.wikipedia.org/wiki/Snapshot_(computer_storage)
LVM2 Project Page: sourceware.org/lvm2
LVM2 Wiki: sources.redhat.com/lvm2/wiki
Known lvremove Bug (original no.): https://bugzilla.redhat.com/show_bug.cgi?id=577798
Known lvremove Bug for RHEL 6: https://bugzilla.redhat.com/show_bug.cgi?id=638711
Petros Koutoupis is a full-time Linux kernel, device driver and application developer for embedded and server platforms. He has been working in the data storage industry for more than six years and enjoys discussing the same technologies.
Petros Koutoupis is a full-time Linux kernel, device-driver and application developer for embedded and server platforms. He has been working in the data storage industry for more than six years and enjoys discussing the same technologies.
Free Webinar: Linux Backup and Recovery
Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.
In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.
|Using Salt Stack and Vagrant for Drupal Development||May 20, 2013|
|Making Linux and Android Get Along (It's Not as Hard as It Sounds)||May 16, 2013|
|Drupal Is a Framework: Why Everyone Needs to Understand This||May 15, 2013|
|Home, My Backup Data Center||May 13, 2013|
|Non-Linux FOSS: Seashore||May 10, 2013|
|Trying to Tame the Tablet||May 08, 2013|
- RSS Feeds
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- Using Salt Stack and Vagrant for Drupal Development
- New Products
- Validate an E-Mail Address with PHP, the Right Way
- Drupal Is a Framework: Why Everyone Needs to Understand This
- A Topic for Discussion - Open Source Feature-Richness?
- Download the Free Red Hat White Paper "Using an Open Source Framework to Catch the Bad Guy"
- Tech Tip: Really Simple HTTP Server with Python
- Home, My Backup Data Center
- Android is Linux -- why no better inter-operation
53 min 4 sec ago
- Connecting Android device to desktop Linux via USB
1 hour 21 min ago
- Find new cell phone and tablet pc
2 hours 19 min ago
3 hours 48 min ago
- Automatically updating Guest Additions
4 hours 57 min ago
- I like your topic on android
5 hours 43 min ago
- Reply to comment | Linux Journal
6 hours 4 min ago
- This is the easiest tutorial
12 hours 19 min ago
- Ahh, the Koolaid.
17 hours 57 min ago
- git-annex assistant
23 hours 57 min ago