Economy Size Geek - Remix the Internet and Your Television with the Roku DVP
This month, the challenge is to write about Linux and entertainment. MythTV is cool, but it's been covered. Boxee looks great, but someone beat me to that punch. I was getting worried I wouldn't find something appropriate to cover until my wife reminded me that the device on which we were watching Farscape runs Linux, and she suggested I see if there was something worth discussing beyond the great selection of documentaries. As luck would have it, there is quite a bit worth writing about.
The device is the Roku Digital Video Player, which launched in 2008. This tiny box uses Linux to stream Netflix video to your television. Until recently, that was the only reason to get one, but now, Roku has started announcing other channels of content (Major League Baseball, Facebook, Pandora and more). It is interesting to see the tiny little box expand its capability. Even more interesting is that Roku has opened a developer program that allows anyone to create custom channels for it.
Before I dive in, here's a little background. My wife is from Seattle, Washington, and is a huge fan and supporter of the KEXP radio station. I have done several projects in the past to bring KEXP to our home in San Antonio, Texas, but looking at the Roku's capabilities, it seems like the perfect platform for bringing KEXP on-demand to our living room.
The first step in becoming a developer is to go to the Roku.com Web site and create an account in its portal. After that, click the link for Developer. There is a small sign-up form where you agree to abide by the rules of the developer program. Once completed, you can download the SDK and get started.
Roku tries to honor its obligation to the GPL code involved in allowing the Roku to work. If you visit www.roku.com/support/gpl_rdvp.aspx, you can download tarballs of software. One thing that struck me in reading the developer agreement is the section that says “Subject to the Grace Period, Your Channel Application must at all times....iii. not contain any open-source code or other restricted code that could require Roku to publicly post or display any third-party notices or any modifications to such code.” I understand what the Roku folks are trying to protect themselves from. Apparently, parts of the Roku platform are licensed from third parties (like the support for WMA), and Roku wants to keep parts proprietary. I assume the MIT license is fine, but it sounds like this environment might not be very friendly to the GPL. I posted a question to the developer forum but did not get any response by the time I had submitted this article for publication.
Assuming you still are interested in the platform, you have three different options for deploying a channel: push it to a local Roku, create it as a private channel or get it approved as a public channel.
The public channel requires Roku's approval. Once it's approved, Roku offers it in the channel store on the Web site. This is the path to take if you are building a channel for public consumption. The private channel allows you to roll out your channel to people. The upside is you don't need Roku's approval to roll it out. The downside is that more steps are involved in getting the channel onto a Roku. The local push is designed for the development phase of your channel. Once you enable development on a Roku (use a remote to enter Home 3x, Up 2x, Right, Left, Right, Left, Right), you can just upload your channel. The SDK includes a handy Makefile to make this incredibly easy. This is how I have done all of my development, as I'm developing channels for myself (and other developers). The main limitation of this last form of development is that you can have only one “development” channel installed at a time. That did not pose much of a problem for me, but if you're sharing code, it could make things more complicated.
All the code for this article is being shared at github.com/economysizegeek/linux_journal_roku. This will make it a lot easier to see the different channels. Simply git clone that repository, and you will have the latest version of all the code. I assume you have turned on developer mode for your Roku. You also need to set an environment variable in your shell so that the Makefile will know where to push the code. In my case, I added export ROKU_DEV_TARGET=192.168.210.244 to my .bashrc. Make sure you put in the IP address of your Roku.
Let's start by doing a simple Hello World! example. This will get you familiar with the tools and also confirm that you have everything working. In the git repository is a directory called hello_world. Inside that directory, you should be able to type make install, and it will push a new channel onto your Roku automatically. If that doesn't work, confirm that you have make, curl and zip installed (the Makefile depends on them). Also make sure your Roku is in Dev Mode (enter the key combo from this article). Additionally, ensure that you didn't set the environment variable (echo $ROKU_DEV_TARGET should print an IP), and check that you didn't set it to the wrong IP (the Roku's IP can be confirmed in Settings→Player Info).
Once you have sorted that out, you should be able to go to the Roku and see a new channel called “Hello World”. Clicking on it with your remote will start the channel. It doesn't actually do anything other than say “Hello World!” The point is to confirm your environment and give you a quick-and-dirty tour of what you need to start making your own channel.
In the hello_world directory, you will see two directories and a few files. The images directory has a variety of images needed for this small application. You will notice that some have HD and some have SD in their names. This represents High Definition and Standard Definition. Because the Roku is connected to a television, you have to make sure any art you display is sized correctly for the TV screen. The Makefile is there to make it easy to compile, install and remove the channel. The manifest file is required by the Roku to build the package on the other side. That just leaves the source directory and the HelloWorld.brs file (Listing 1). The brs file is the BrightScript that actually sets up the channel.
|Red Hat Enterprise Linux 7.1 beta available on IBM Power Platform||Jan 23, 2015|
|Designing with Linux||Jan 22, 2015|
|Wondershaper—QOS in a Pinch||Jan 21, 2015|
|Ideal Backups with zbackup||Jan 19, 2015|
|Non-Linux FOSS: Animation Made Easy||Jan 14, 2015|
|Internet of Things Blows Away CES, and it May Be Hunting for YOU Next||Jan 12, 2015|
- Linux Graphics News
- GIMP Shmimp, Give Me a Browser
- Non-Linux FOSS: Seashore
- Linux Graphics News - August 2013
- Ideal Backups with zbackup
- Wondershaper—QOS in a Pinch
- Designing with Linux
- Red Hat Enterprise Linux 7.1 beta available on IBM Power Platform
- Internet of Things Blows Away CES, and it May Be Hunting for YOU Next
- Raspberry Pi: the Perfect Home Server
Editorial Advisory Panel
Thank you to our 2014 Editorial Advisors!
- Jeff Parent
- Brad Baillio
- Nick Baronian
- Steve Case
- Chadalavada Kalyana
- Caleb Cullen
- Keir Davis
- Michael Eager
- Nick Faltys
- Dennis Frey
- Philip Jacob
- Jay Kruizenga
- Steve Marquez
- Dave McAllister
- Craig Oda
- Mike Roberts
- Chris Stark
- Patrick Swartz
- David Lynch
- Alicia Gibb
- Thomas Quinlan
- Carson McDonald
- Kristen Shoemaker
- Charnell Luchich
- James Walker
- Victor Gregorio
- Hari Boukis
- Brian Conner
- David Lane